
BootDoc podoscope
Stand on a lit glass plate and your fitter sees how your foot loads under your weight, and whether your arch is low, mid or high. Your arch type guides your footbed and boot choice.
Expert boot fitters at all 3 Long Island stores. Walk in, no appointment needed.
Already own boots?
You don't need new boots to get a better fit. Our fitters work on every brand, from any shop, whether they're new or a few seasons old, and we'll tell you honestly what can be fixed.
Too tight? We can almost always make room. Plastic shells can be stretched, punched and ground where they press.
We grind or reshape the shell over the top of the foot, then remold the liner.
We check your length and stance, then punch the shell for toe room.
We punch the shell exactly where it presses.
We spot-punch the shell or pad around the bone.
Too loose? That's harder. We can't make a shell smaller, and a liner that has packed out doesn't spring back. We'll tell you honestly if yours can be saved.
Heel lifts, padding and a footbed can lock the heel down, if there isn't too much room.
Usually a packed-out liner. Padding and a footbed help; a worn-out liner may need replacing.
A full fit and heat mold on boots bought elsewhere is $100.
Heat molding and fit adjustments are covered by our Boot Fit Guarantee for as long as you own the boots.
How it works
No mystery, no pressure. Plan to stay a while, and bring the ski socks you ski in and your current boots and footbeds.
Tell us how and where you ski, and what hurts. There's a $50 fitting fee, which comes off your boots if you buy them at Sno-Haus.
We measure both feet and read your arch type on a BootDoc podoscope.
Liner out, foot in the bare shell. No liner can fix the wrong shell, so we get this right first.
A BootDoc footbed supports your arch and improves fit over a standard footbed. ZipFit liners available as needed.
We heat-mold the liners and check your stance. Bought at Sno-Haus? Come back for adjustments as often as you need.

Stand on a lit glass plate and your fitter sees how your foot loads under your weight, and whether your arch is low, mid or high. Your arch type guides your footbed and boot choice.
Measures the length, width and arch of each foot, so your shell size and footbed come from numbers, not estimates.

Shapes the boot shell itself, not just the liner, to your foot and lower leg using heat and air pressure. For Fischer boots with Vacuum shells.

Cork-filled liners that mold to your foot and don't pack out like foam. Your fitter can add cork later to fine-tune the hold.
The footbed that comes in most boots is flat foam. BootDoc's 3-Arch system matches a footbed to your arch type, low, mid or high, and it can be customized to your foot. Your arch stops flattening and cramping, and you can ski with looser buckles and warmer feet.

The foot rolls inward and has less natural cushioning. A low-arch footbed stabilizes it and stops it collapsing.

A balanced foot that spreads your weight across the heel and the balls of the foot. A mid-arch footbed balances support and cushioning.

Less of the foot touches down, so pressure builds in a few spots. A high-arch footbed spreads it out evenly.
Sock tip: the right ski sock changes how your boot fits. During your fitting, ask our staff whether full cushion, targeted cushion or no cushion is best for your foot and the way you ski.
Fitted in store, or order online for free pickup at all 3 stores.

BootDoc
3-Arch: low, mid or high
Bootdoc Comfort Insole
$69.95
▣ Free pickup at all 3 stores

BootDoc
Universal shape
Bootdoc Uni Arch Insole
$80.00
▣ Free pickup at all 3 stores

BootDoc
Full custom
Bootdoc Alpine Full Custom Insold
$199.95
▣ Free pickup at all 3 stores

Zipfit
Cork liner
Gara Stealth LV (94-98)
$559.00
▣ Free pickup at all 3 stores
Boots bought at Sno-Haus Free for the life of the boot
Ski and snowboard boots.
Covered by the Boot Fit Guarantee, as often as needed.
The $50 fitting fee comes off the price of your boots.
Boots bought elsewhere
Full fit and heat mold, flat price.
Buckle and hardware repair and fit work. 1-hour minimum.
If you don't buy boots, the $50 fee becomes store credit.
How Sno-Haus compares with a mountain shop and buying online. Boots are the one purchase where the shop you choose changes what you get.
| What you get | Sno-Haus | Mountain shop | Online |
|---|---|---|---|
| Fitter measures your foot in person | ✓ | ✓ | ✕ |
| Arch type read on a podoscope | ✓ | Varies | ✕ |
| Shell fit checked before you buy | ✓ | Varies | ✕ |
| Liner heat molded to your foot | ✓ | Varies | ✕ |
| Punching and grinding on site | ✓ | Varies | ✕ |
| Guaranteed to fit for the life of the boot | ✓ | ✕ | ✕ |
| Come back mid-season for a tweak | ✓ | ✕ | ✕ |
| Fitting fee comes off your boots, or kept as store credit | ✓ | ✕ | ✕ |
2 W Jericho Tpke, Huntington Station, NY 11746
One block from the Walt Whitman Shops Mall
(631) 549-5087
47 Northern Blvd, Greenvale, NY 11548
5 minutes off exit 39 of the LIE
(516) 621-6668
244 N Franklin St, Hempstead, NY 11550
3 minutes from downtown Garden City
(516) 481-3305
No. Walk in to any of our three stores whenever we're open.
Usually not. Most pain is a pressure point, a volume issue, or a liner that was never molded. Even a liner that has packed out over a few seasons can often be re-molded or shimmed rather than replaced.
Snug all over. Your toes brush the front when you stand up straight and pull back when you flex into a ski stance. Tight is not the same as painful.
Boots bought at Sno-Haus are guaranteed to fit for life. Shell punching, heel lifts, wedges, canting and fit adjustments are covered, as often as you need, for as long as you own the boots.
Every store has a BootDoc podoscope. You stand on it, and your fitter sees whether your arch is low, mid or high and how your foot loads under your weight. That guides which footbed and boot suit you.
The footbed in most boots is a flat sheet of foam with no arch shape and no heel cup. A BootDoc footbed supports the arch, holds the heel in place and lets you ski with looser buckles, which also keeps your feet warmer.
A replacement liner with cork-filled zones around the ankle and tongue. The cork molds to your foot and doesn't pack out like foam, and more can be added later to fine-tune the fit. ZipFit liners are fitted at our Huntington and Greenvale stores.
A process that heats the shell of a Fischer Vacuum boot and uses air pressure to shape it to your foot and lower leg, which can make the shell roomier or closer-fitting where you need it. It's available at our Huntington store.
Plan to stay a while. A first fitting usually takes about an hour, because we measure, check shells, fit footbeds and mold liners in one visit. Adjustments later are quick.
Yes. Full fit and heat mold for boots bought elsewhere is a flat $100.
A boot fitting is $50, and it comes off your boots if you buy them at Sno-Haus. If you don't, it becomes store credit. Heat molding is free on boots bought at Sno-Haus, and shell work, heel lifts, wedges and canting are covered by the Boot Fit Guarantee. On boots bought elsewhere, a full fit and heat mold is a flat $100, and boot repair and adjustments are parts plus $50 an hour, with a 1-hour minimum.
Yes. Snowboard boots use heat molding and liner work rather than shell punching, and we fit them at every store.
Yes. We heat-mold snowboard boot liners at all 3 stores. It's free on boots bought at Sno-Haus, for as long as you own them. On boots bought elsewhere, a full fit and heat mold is a flat $100.
We charge a $50 fee at the start of every boot fitting. A good fitting takes real time and care, and we take it seriously. We ask that you do too. If you buy your boots at Sno-Haus, the $50 comes off the price of your boots. If you don't, you still leave knowing exactly what kind of boot fits your foot, and the $50 becomes store credit you can use on anything in the store, any time. It never expires.
"James m is one of the most helpful salesmen I've talked to in a minute. Knows his stuff and helped me pick a perfect boot. He also explained what does what. 5 stars isn't enough for how helpful he was!"